Converting

    Anti-Static

DisCord Plus - anti-static cord

Use DisCord Plus to remove static charge on moving webs. Simply mount the elastic cord tautly across the web (it doesn't need to touch) and ensure it is earthed at one end.

Alternatively, earth at one end, and drape vertically over an unwind or rewind reel, to prevent operator shocks.

Read the review on theImage Reports website.

ArcRod - anti-static rod

For even better static kill, the semi-rigid ArcRod can be mounted easily across the web. Optional magnetic attachment make it easily possible to move the ArcRod.

Read the review on the Image Reports website.

Powered Anti-Static Bars

Arcalian supply a wide range of active (powered) anti-static bars for every application. We have traditional anti-static bars powered by a separate transformer (a transformer can control up to four bars), and "intelligent" bars that are self-contained, needing no external transformer.

We also supply ATEX bars for explosion-proof areas.

Anti-Static Equipment

Arcalian supply

• Ionising blowers (bench or floor-mounted)
• Mobile ionising guns
• Ionising points (individual ionisers with no air connection)
• Ionising nozzles (individual ionisers with an air stream)

    Web Cleaning

Adhesive Rolls for Web Cleaners

Arcalian supply specially engineered to allow transfer of contamination in one direction only and can be manufactured in virtually any size to fit any Contact Cleaner, including those of our competitors.

We supply both Continuous and Pre-Cut Adhesive Rolls.

Web Cleaning Sleeves

The Web Cleaning Sleeve converts any path roller into a web cleaning roller. The WCS is made from a specially formulated polymer which will pick up contamination from the web as it passes.

• No installation space required
• Simply inflate the sleeve with an airline and push it on to the roller
• Quick and easy cleaning - use Arcalian Wipes during routine line maintenance
• Sleeves available in any length up to 10 metres
• Sleeves can fit rollers with O.D.:  38mm, 50mm, 75mm, 88mm, 100mm, 127mm, 152mm

Contamination Analysis Rollers

The majority of contamination on any wound reel is on the edges, where slitting dust will gather. On the bottom side contamination from storage (such as wooden pallets) will be visible, while the top surface will harbour airborne contamination.

Use Contamination Analysis Rollers,  smoothly applied to any flat surface, removing any loose, dry contamination. The roller is then cleaned on the Adhesive Pad which traps the contamination, leaving the roller clean for the next surface.

Clean the edge of each roll of material with a Contamination Analysis Roller before starting the line, and don't forget to examine the pad to understand the sources of your contaminants.

Replacement Polymer Rollers for Contact Clean Machines

Arcalian can upgrade Polymer Rollers in any Contact Cleaner, and can advise on the perfect formulation and surface characteristics for any substrate.

With the right information, we can quote replacement rollers (either individually or in sets), either to replicate the originals, enhance cleaning abilities, or transform the Contact Cleaner to Silicone-Free operation.

IPA Wipes for Polymer Roller maintenance

High quality, lint-free IPA wipes for maintaining board cleaner polymer rollers in top condition. Sold in tubs of 200.

Dust Control

Disposable and Permanent Dust Control Flooring

Arcalian has a wide range of flooring solutions for keeping dust-critical areas free of foot and wheel-borne contamination.

Clean Room Rollers

The Floor and Wall Cleaning Rollers were designed specifically for cleaning the interior floors and walls of the Clean Room. An extended handle is easily added to the grip to allow ceilings to be easily cleaned also.

Hand and Glove Cleaner

The Hand and Glove Cleaner is here to cut your cost of glove replacement. This unit is designed to extend the life of disposable gloves and reusable gloves with as little inconvenience as possible. This allows usage from your gloves while maintaining a cleaner working environment.